Firestick Remote Volume Not Working on TV: Comprehensive Guide to Troubleshoot and Solve the Issue

Is your Firestick remote volume not working on your television? You’re not alone. Numerous Firestick users grapple with this issue regularly. But what precisely triggers this issue? Is it a hint that your remote has become redundant? Not necessarily. This article will detail the common causes of Firestick remote volume issues and provide well-tested solutions to rectify the problem.

What Exactly is a Firestick Remote?

A Firestick remote is an integral part of the Amazon Firestick- a compact media streaming device that connects to an HDTV, granting users access to a plethora of movies, TV shows, applications, and games. Despite its petite size, akin to a large pen drive, the Firestick houses an impressive quad-core processor and robust Wi-Fi connectivity. The device comes with a voice control feature, enabling users to scour Amazon video content using voice commands.

Possible Causes for Firestick Remote Volume Malfunction

The lack of responsiveness in your Firestick remote’s volume could be attributed to several factors. These include weak or drained batteries, signal interference, or worn-out buttons. Let’s delve into these common causes:

Weak Batteries

Batteries inevitably lose their charge over time, and poor-quality batteries can start to fail prematurely. Thus, weak batteries could be the culprits behind your malfunctioning volume button.

Infrared Frequency

Another common cause is the mismatched infrared frequency among your Firestick remote, your television, and the TV controller. If the infrared frequencies of these devices are incompatible, you may experience interference, causing some commands on your remote to malfunction.

Worn-out Rubber

If you’ve been using the same remote for over five years, the rubber on your volume button may have worn out, causing it to become unresponsive.

Effective Solutions for Firestick Remote Volume Issues

If your Firestick remote’s volume control isn’t working, don’t fret. Here are ten tried-and-true methods to restore the functionality of your remote’s buttons:

1. Reconnect your Firestick

Simply unplug your Firestick from the power outlet, wait for a few minutes, and then reconnect it. This is a straightforward and practical solution for various Firestick issues, including volume problems.

2. Reset the Firestick’s remote control

Try resetting your remote control by following these steps:

  1. Turn off your Fire Stick and TV.
  2. Disconnect your Firestick from the power source for one minute.
  3. Hold down the left, menu, and back buttons on your remote for around 15 seconds.
  4. Wait for about five seconds and then remove your remote’s batteries.
  5. Reconnect your Firestick to the power source and wait for one minute.
  6. Put the batteries back into your remote and finally, press the home button on your remote.

3. Replace the batteries

If your Firestick remote’s batteries are dead or low on power, replace them with new ones. Sometimes, simply removing the batteries for 10 seconds and then reinserting them can do the trick.

4. Restart the Firestick

To restart your Firestick, press the Select and Play buttons simultaneously. This action can resolve a range of issues, including volume difficulties.

5. Reset the Firestick to Factory Settings

If all else fails, consider resetting your Firestick to its factory settings. This action will erase all data from the device, including settings, preferences, and downloads. However, it could resolve your volume issues.

6. Check for the Mute Button

Ensure that the mute button hasn’t been accidentally pressed on any of your remote controls. If it has, simply press it again to unmute.

7. Disable the Dolby Digital Plus Feature

The Dolby Digital Plus feature is a sound setting that can enhance the sound quality of specific apps. However, it can make other apps quieter than usual, causing volume issues.

8. Use the HDMI-CEC Port on Your Television

If your TV has an HDMI-CEC port, enabling it will allow your Firestick to control your TV’s volume.

9. Manually Pair Your Remote

If your Firestick remote has become disconnected from your TV, you can manually pair it back using the following steps:

  1. Unplug your Firestick from the power source.
  2. Reconnect the Firestick and wait for it to fully boot up.
  3. Press and hold the home button on your remote for at least 10 seconds or until the light on top of your remote begins to blink rapidly.
  4. Wait for a message prompt or a blue light blinking three times on your remote. This indicates that your device has been successfully paired.

10. Use the Firestick Remote App

If your remote is permanently broken and you can’t wait for a replacement, consider using the Firestick Remote App on your Android or iPhone.

Final Thoughts

Though fixing your Fire TV remote might seem daunting, it’s a task you can handle on your own with the right guideline. If you’re still unable to fix the issue, consider purchasing a new remote. It might cost you a little, but it will definitely make your life easier.

What to do if the volume on my Firestick remote isn’t working?

You can try reconnecting your Firestick, resetting the Firestick remote control, replacing the batteries, restarting the Firestick, or even resetting the Firestick to factory settings. If none of these methods work, you may need to use the Firestick remote app or purchase a new remote.

What could be the possible reasons why my Firestick remote volume is not working?

There could be various reasons, including weak or dead batteries, interference with the infrared frequency, or worn-out buttons on the remote.

Can I use my phone as a Firestick remote?

Yes, you can use your Android or iPhone as a Firestick remote by downloading the Firestick Remote App. This could be a temporary solution if your physical remote is permanently broken and you can’t wait for a replacement.