How to Fix CID Manager and Logo on Samsung Galaxy A12 Exynos (Binary 3) 💣​

YouTube video

Introduction

In this article, we will discuss how to fix CID Manager and Logo issues on the Samsung Galaxy A12 Exynos (Binary 3) device. We will provide a step-by-step process to help you resolve these problems and ensure a smooth user experience. By following the instructions outlined below, you can easily fix the annoying sign that appears and achieve a successful repair.

Key Points

  1. Introducing the Samsung Galaxy A12 Exynos (Binary 3)
  2. Understanding the need for fixing CID Manager and Logo issues
  3. Preparing the device for the repair process
  4. Flashing the device using a specific rum
  5. Adjusting settings and activating developer options
  6. Performing a factory reset to ensure a clean start
  7. Using the “Login” method for convenience
  8. Installing the necessary applications for the repair
  9. Disconnecting the service provider sign temporarily
  10. Repairing the device using the Z3X tool
  11. Updating the software for smoother performance
  12. Patching the device to prevent future issues
  13. Removing the annoying CID Manager using Link2SD
  14. Freezing the CID Manager application to stop it from causing problems
  15. Restarting the device to see the changes
  16. Verifying that the annoying sign has disappeared
  17. Inserting the SIM card and testing the device

Step-by-Step Process

  1. Begin by preparing the Samsung Galaxy A12 Exynos (Binary 3) device for the repair process.
  2. Connect the device to Wi-Fi and open the settings.
  3. Turn off the device and enter the model back menu by pressing and holding the volume down and up buttons simultaneously.
  4. Unlock the device and proceed with the flashing process by using the provided rum.
  5. Once the flashing process is complete, enter the settings and zoom in on the phone information.
  6. Activate developer options and enable debugging.
  7. Turn off the device and put it in side mode to release the root.
  8. Open the “Login” application and search for the boot root to load it.
  9. Turn off the device and enter side mode to start the factory reset process.
  10. Wait for the phone to start and remove the annoying sign in the settings.
  11. Install the Magic and CID Manager removal applications on the device.
  12. Disconnect the service provider sign temporarily to prevent interference.
  13. Install the Link2SD application and search for the CID Manager.
  14. Freeze the CID Manager application to stop it from causing problems.
  15. Restart the device to see if the annoying sign has disappeared.
  16. Insert the SIM card and test the device to ensure a successful repair.

By following these steps, you can easily fix the CID Manager and Logo issues on your Samsung Galaxy A12 Exynos (Binary 3) device and enjoy a seamless user experience.

Conclusion

In conclusion, repairing CID Manager and Logo issues on the Samsung Galaxy A12 Exynos (Binary 3) device is a simple process that can be accomplished by following the outlined steps. By using the recommended tools and applications, you can effectively resolve these problems and ensure a smooth functioning device. Remember to always follow the instructions carefully and proceed with caution. If you encounter any difficulties, seek professional assistance to avoid any further complications. We hope this article has been helpful in guiding you through the repair process. Good luck!