How to Reset/Re-program VW Remote Key or Change the Battery (Audi, Skoda, SEAT)

YouTube video

In this article, we will discuss how to reset/re-program the remote key for your Volkswagen (VW) car, or how to change the battery if needed. Whether you own an Audi, Skoda, SEAT, or any other VW model with a similar key system, the process is relatively simple and can be done at home without the need for professional assistance.

Step-by-Step Process

Step 1: Replace the Battery

If your key is not working, it is recommended to first check if the battery needs to be replaced. Here’s how you can do it:

  1. Open the key fob by locating the plastic top and pulling it up gently.
  2. Disconnect any connection present.
  3. You will find a small gap where the battery is located. Remove the old battery.
  4. When installing the new battery, ensure that the positive side is facing up.
  5. Simply push the new battery into place and close the key fob.

Step 2: Reprogram the Key

If the key still doesn’t work after the battery replacement, you can try reprogramming it. Here’s how:

  1. Refer to the owner’s manual, which is usually located in the glove box of your car.
  2. Look for the specific instructions on how to reprogram the key.
  3. Locate the keyhole under the plastic bed of your key fob.
  4. Insert your key into the keyhole.
  5. Press the open button on your key fob to unlock the door.
  6. Within a minute of unlocking the door, insert the key into the ignition.
  7. Turn the ignition on.
  8. Your key should now be reprogrammed or synchronized, as mentioned in the owner’s manual.

Key Points to Note

Here are some key points to keep in mind while resetting or reprogramming your VW remote key:

  • Always consult the owner’s manual of your specific VW model for accurate and detailed instructions.
  • Ensure that you have a new battery before attempting to replace the old one.
  • When replacing the battery, make sure the positive side is facing up.
  • Inserting the key into the keyhole and turning on the ignition helps synchronize the key with the car’s system.
  • It is recommended to perform these steps within a minute of unlocking the door with the key.


Resetting or reprogramming your VW remote key is a simple process that can save you time and money. By following the step-by-step instructions provided in the owner’s manual and this article, you can easily replace the battery or reprogram the key at home without any professional assistance.

Remember to always consult the owner’s manual for accurate instructions specific to your VW model. Additionally, if you encounter any difficulties or the issue persists, it is advisable to seek professional help from a certified VW technician or locksmith.

For more information and tips on similar topics and other car models, feel free to visit our website. We provide additional resources for troubleshooting key fob issues, as well as various car-related articles to cater to your needs.

Don’t let your malfunctioning key fob ruin your driving experience. Take control of the situation and get your VW remote key working smoothly again!