How to Use Honda’s Remote Engine Start Feature for Preconditioned Cabin

YouTube video

Honda’s remote engine start feature is a convenient tool that allows you to start your vehicle and precondition the cabin before you even step inside. This article will guide you through the step-by-step process of using this feature and provide detailed information on its functions and limitations.

Key Points:

  • The remote engine start feature allows you to start your Honda vehicle remotely before you approach it.
  • The range of this feature is approximately 100 feet, but may vary if there are obstacles between the remote and the vehicle.
  • To use the system, press the lock button on the remote, then, within five seconds, press and hold the remote start button.
  • The engine may take a few moments to start, and once it does, the vehicle will flash the turn signal six times to indicate successful activation.
  • The engine will run for 10 minutes when started remotely and can be extended for another 10 minutes by repeating the start procedure within the initial period.
  • To shut off the engine remotely, simply press the remote start button again. The vehicle’s turn signals will flash once to confirm the engine’s shutdown.

Step-by-Step Guide:

  1. Ensure you have the Honda smart entry remote in your possession.
  2. Stand within 100 feet of your vehicle, with minimal obstructions between the remote and the vehicle.
  3. Press the lock button on the remote.
  4. Within five seconds, press and hold the remote start button.
  5. Wait a few moments for the engine to start. The vehicle will signal successful activation by flashing the turn signal six times.
  6. Once the engine is running, it will continue to do so for 10 minutes.
  7. If you wish to extend the running time, repeat the start procedure within the initial 10-minute period.
  8. To shut off the engine remotely, press the remote start button again. The vehicle’s turn signals will flash once to confirm the engine’s shutdown.

Cabin Conditioning:

When the engine is started remotely, the climate control system in the vehicle will work to establish a comfortable cabin temperature of 72 degrees. On warm days, the system will utilize the air conditioning system in recirculation mode. On cold days, the heater and defrosters will engage to warm up the cabin.

Please note that if your vehicle is equipped with front seat heaters, they will start in high mode to provide warmth, but the indicator light will not illuminate while the engine is running.

Driving Safely:

To begin driving, approach the vehicle as you normally would with the smart entry remote in your possession. Once inside, you must still depress the brake pedal and push the engine start/stop button to start the vehicle’s motion.

It is important to prevent dangerous carbon monoxide buildup by ensuring that the vehicle is located outside in a well-ventilated area. This will help to maintain a safe environment while using the remote engine start feature.

Additional Information:

If a second remote is inside the vehicle when it is locked, the remote engine start feature will not work. However, both remotes can be used to lock the vehicle. If the second remote is needed, it should be kept outside the vehicle so that the remote engine start feature can function properly.

Using Honda’s remote engine start feature is a convenient way to prepare your vehicle for a comfortable drive, especially in extreme weather conditions. By following the simple steps outlined in this guide, you can enjoy a preconditioned cabin before entering your Honda vehicle. Stay safe and enjoy the added convenience provided by this feature.