How to Use Remote Engine Start on 2018 Honda Accord

YouTube video

The Honda Accord is known for its advanced features and technological innovations, and one such feature is the remote engine start. This feature allows you to start the vehicle remotely before you even get to it, ensuring that the cabin is preconditioned and comfortable when you enter. In this article, we will discuss how to use the remote engine start on a 2018 Honda Accord in detail.

Step-by-Step Guide: Using Remote Engine Start on a 2018 Honda Accord

To use the remote engine start feature on your Honda Accord, follow these steps:

  1. Step 1: Lock the Vehicle
  2. Press the lock button on the remote of your Honda Accord. This will secure the vehicle and prepare it for remote engine start.

  3. Step 2: Activate Remote Engine Start

  4. Within 5 seconds of locking the vehicle, press and hold the remote start button on the remote. The engine start button can be identified by its symbol.

  5. Step 3: Wait for the Engine to Start

  6. After activating the remote engine start, wait for a few moments. The engine may take a short while to start.

  7. Step 4: Vehicle Confirmation

  8. Once the engine starts, the vehicle will flash the turn signals six times. This serves as a confirmation that the engine has been remotely started.

  9. Step 5: Running Time

  10. The engine will run for 10 minutes and then automatically shut off. However, if you want to extend the running time for another 10 minutes, you can repeat the start procedure within the initial 10-minute period.

  11. Step 6: Stopping the Engine Remotely

  12. If, for any reason, you want to stop the engine remotely, simply press the remote start button again. The turn signals will flash once, indicating that the engine has stopped.

Key Points to Remember

Here are some key points to remember when using the remote engine start feature on a 2018 Honda Accord:

  • The remote engine start feature works within a range of approximately 100 feet, although this range may be slightly reduced if there are obstructions such as buildings or other objects between the remote and the vehicle.
  • The climate control system in the vehicle will automatically seek to establish a temperature of 72 degrees Fahrenheit in the cabin when the engine is remotely started. On warm days, it will use the air conditioning system in recirculation mode, while on cold days, the heater and defroster will be engaged.
  • It is important to note that if your vehicle is equipped with front seat heaters, they will come on in low mode to provide some warmth to the seats. However, the indicator light for the seat heaters will not illuminate while the engine is running.
  • To enter and start driving the vehicle, you must still physically approach the vehicle and use the smart entry remote to open the doors. Once inside the vehicle, you will need to depress the brake pedal and push the engine start/stop button to start the engine.

Ensuring Safety and Precautions

While using the remote engine start feature on your Honda Accord, it is crucial to prioritize safety and take necessary precautions. Here are some points to keep in mind:

  • Always ensure that the vehicle is located outside in a well-ventilated place to prevent the buildup of dangerous carbon monoxide.
  • If there is a second remote inside the vehicle, it can be locked using the other remote. However, please note that the remote engine start feature will not work if the second remote is inside the vehicle.

Using the remote engine start feature on a 2018 Honda Accord can provide convenience, especially during extreme weather conditions. By following these simple steps and taking necessary precautions, you can enjoy a comfortable cabin and a pleasant driving experience.