Jeep Cherokee Apple Carplay: How to Upgrade to Uconnect 8.4 Apple CarPlay & Android Auto

YouTube video

In this article, we will discuss how to upgrade your Jeep Cherokee to have Apple CarPlay and Android Auto on the UConnect 8.4 inch screen. By following the steps outlined in this guide, you will be able to enjoy the benefits of these features on your 2014-2019 Jeep Cherokee.

Key Points:
1. The UConnect 8.4 inch screen is common in Chrysler, Dodge, Jeep, and Ram vehicles with model years ranging from 2013 to 2019 or 2020.
2. The upgrade allows you to control Apple CarPlay and Android Auto using the factory buttons, similar to other vehicles on the market.
3. The process involves removing the screen, disconnecting the connectors, and installing a plug-and-play harness.
4. Optional add-ons include installing cameras and enabling video in motion for factory DVD players.
5. The programming process for the interface is simple and straightforward, requiring a Windows or Mac computer to download and install the software.
6. After the installation, testing is crucial to ensure that everything is functioning correctly before permanently closing the panels.

Step 1: Removing the Screen

To begin the upgrade, locate the four 8mm screws holding the screen in place. Carefully remove these screws using a screwdriver. Once the screws are removed, the screen can be detached from the dashboard. Disconnect the various connectors at the back of the screen, including the main connector, USB connector, and antennas.

Step 2: Installing the Plug-and-Play Harness

Next, install the supplied plug-and-play harness into the main power connector of the screen. Ensure that all the connectors are securely plugged in. This harness will allow you to connect the Apple CarPlay device and control it using the factory buttons.

Step 3: Optional Add-Ons

If you choose to install cameras or enable video in motion, now is the time to do so. Run the camera cables from the back of the vehicle to the front dashboard, connecting them to the appropriate ports on the plug-and-play harness. Ensure that you follow the labeling and instructions provided for each specific camera.

Step 4: Programming the Interface

To program the interface, connect it to a Windows or Mac computer using a USB to micro USB cable. Download and open the software for the specific Jeep model (e.g., Jeep Wrangler). Follow the on-screen instructions to complete the installation. The whole process should take less than two minutes. After the installation, ensure that the dip switches on the interface are set to the correct position.

Step 5: Testing and Finalizing the Installation

With the interface programmed, reassemble the components by reconnecting the screen and securing it with the four 8mm screws. Before closing everything permanently, conduct a thorough test to verify that all the components are working correctly. Connect any additional cameras and check the functionality of Apple CarPlay and Android Auto. Once you are satisfied with the results, complete the final installation by securing all the panels and connectors.

By following these steps, you can successfully upgrade your Jeep Cherokee to have Apple CarPlay and Android Auto functionality on the UConnect 8.4 inch screen. Enjoy the convenience and features of these popular technologies in your vehicle.

Using this guide, you can enhance your driving experience by integrating your smartphone seamlessly with your Jeep Cherokee. Don’t miss out on the benefits of Apple CarPlay and Android Auto – upgrade your UConnect 8.4 inch screen today!

Note: This guide is specifically designed for 2014-2019 Jeep Cherokee models, but the process may be applicable to other Chrysler, Dodge, Jeep, and Ram vehicles with the UConnect 8.4 inch screen. Use caution and follow the instructions carefully to avoid damaging your vehicle.