**Nissan Key Fob Not Working: A Quick and Cost-Effective Fix**

YouTube video

Are you experiencing issues with your Nissan key fob? Does it fail to unlock the doors or start your car? If so, you’re in the right place. In this article, we will guide you on how to fix a non-functional Nissan key fob without breaking the bank. By following these simple steps, you can save hundreds of dollars that would otherwise be spent on a new remote.

Key Points:

  1. Introduction to the Problem
  2. Failed Attempt: Battery Replacement and Resyncing
  3. The Unhelpful Dealer Solution
  4. Do-It-Yourself Solution: Opening the Key Fob
  5. Identifying the Cause of the Problem
  6. The Role of Contacts in Power Transmission
  7. Simple Fix: Adjusting the Contacts
  8. Testing and Verifying the Solution
  9. Cost Savings and Dealer Practices

Introduction to the Problem

If you own a 2014 Nissan Pathfinder and your key fob suddenly stops functioning, you may find it frustrating and inconvenient. Symptoms of a key fob malfunction include an inability to unlock the doors from a short distance, failure to start the car when the key fob is near the start button, and a “no key detected” message appearing on your display.

Failed Attempt: Battery Replacement and Resyncing

Your first instinct might be to replace the batteries in your key fob, hoping that this will resolve the issue. However, in many cases, a simple battery replacement does not fix the problem. Another troubleshooting method that Nissan owners commonly attempt is resyncing the key fob with the car by using the battery-unplugging method or other similar techniques. Unfortunately, these methods often prove unsuccessful as well.

The Unhelpful Dealer Solution

Frustrated with the lack of success, you may have sought assistance from your local Nissan dealer. To your dismay, they presented you with a whopping bill of $414 for a single new key. Moreover, since both of your key fobs were faulty, the cost would have been even higher. Luckily, there is a DIY alternative that can save you a significant amount of money.

Do-It-Yourself Solution: Opening the Key Fob

To fix your non-functional Nissan key fob, you can perform a simple do-it-yourself repair. By following the steps below, you can regain full functionality without breaking the bank.

  1. Slide your key out of the fob.
  2. Take a credit card or similar object and insert it into the groove between the top and bottom halves of the key fob.
  3. Gently pry open the key fob using the card to separate the two halves.

Identifying the Cause of the Problem

Once you’ve successfully opened the key fob, you’ll be able to see its internal components. The main issues that cause the key fob to malfunction are related to the battery contacts and their connection to the chip.

The Role of Contacts in Power Transmission

In a properly functioning key fob, the battery contacts should be in direct contact with the battery, ensuring smooth power transmission to the chip. However, in your case, these contacts may have been slightly low or pressed in too far, resulting in an interrupted power supply.

Simple Fix: Adjusting the Contacts

To fix this issue, you need to adjust the battery contacts in your key fob. Using a credit card or a similar tool, gently lift up the contacts on both sides of the fob. By doing so, you can ensure that the contacts make proper contact with the battery, allowing the power to flow smoothly to the chip.

Testing and Verifying the Solution

After adjusting the contacts, it’s time to test your key fob. Place the battery back into its compartment and reassemble the key fob by snapping the two halves together. Try unlocking the doors and starting your car to verify if the issue has been resolved. If everything works as expected, congratulations! You have successfully fixed your Nissan key fob.

Cost Savings and Dealer Practices

The cost savings associated with this DIY fix are significant. By avoiding the extravagant fees charged by dealerships for a new key fob, you can potentially save hundreds of dollars. Unfortunately, some dealerships may not inform you about this simple fix, instead encouraging you to purchase a new remote unnecessarily. Awareness of such practices can help Nissan owners make informed decisions and save money.

In conclusion, if you find yourself grappling with a non-working Nissan key fob, don’t panic. Follow the steps outlined in this article to open the key fob, identify the problem, adjust the battery contacts, and reassemble the fob. By doing so, you can restore full functionality to your key fob, save a substantial amount of money, and avoid unnecessary dealership expenses. Remember, sometimes the solution to a complex problem can be surprisingly simple.