Uconnect Display Issues: How to Perform a Soft Reset on Your Jeep, Dodge, Chrysler, or Fiat

YouTube video

Introduction

In this article, we will discuss how to perform a soft reset on the Uconnect system in your Jeep, Dodge, Chrysler, or Fiat vehicle. The Uconnect system is an advanced infotainment system that offers various features and functions. However, there may be instances where you encounter display issues or glitches. By following the steps outlined in this article, you can easily perform a soft reset and resolve these issues.

Step-by-Step Guide to Performing a Soft Reset

  1. Accessory Mode Activation: To initiate the soft reset process, first, ensure that your vehicle is in accessory mode. This can be done by turning the ignition to the “ON” position without starting the engine.

  2. Soft Reset: Once your vehicle is in accessory mode, lock your fingers and hold the power button on the Uconnect display for approximately five to ten seconds. You will notice that the display will go blank, indicating that the soft reset process has started.

  3. Quick Recycle: After the display goes blank, it will quickly recycle and restart. This indicates that the soft reset has been completed successfully.

Troubleshooting Uconnect Display Issues

Sometimes, certain functions of the Uconnect system can become glitchy or malfunction. If you encounter any of these issues, performing a soft reset can often resolve the problem. However, if the display remains completely black even after a soft reset, there may be other underlying issues that need to be addressed. It is advisable to consult with a professional technician or contact the manufacturer’s support for further assistance.

Soft Reset for Newer Vehicles

For owners of newer vehicles, there is an additional method to perform a soft reset on the Uconnect system. This method is specifically applicable to vehicles manufactured from 2016 to the current 2021 model years.

  1. Run Mode Activation: Start by putting your vehicle into run mode. This can be done by turning the ignition to the “ON” position while also starting the engine.

  2. Top Area Reset: Once your vehicle is in run mode, locate the top area of the Uconnect display and hold it for approximately 15 seconds. This will initiate the soft reset process.

  3. Factory Settings Restoration: By performing this soft reset, some of your Uconnect system settings will be restored to their factory defaults. This can be useful if you have made changes to certain configurations and would like to revert back to the original settings.

Please note that this method is not compatible with vehicles manufactured from 2014 to 2016. If you own a vehicle within this range and are experiencing display issues, it is recommended to use the first method mentioned in this article.

Compatibility with Different Vehicle Models

It is important to note that the Uconnect system is not exclusive to Jeep vehicles. If you own a Dodge, Chrysler, or Fiat vehicle with the same Uconnect system, you can also perform the soft reset using the methods described in this article. The compatibility extends across various vehicle models as long as they are equipped with the Uconnect system.

Conclusion

The Uconnect display in Jeep, Dodge, Chrysler, and Fiat vehicles can sometimes experience glitches or display issues. In such cases, performing a soft reset can help resolve the problem. By following the step-by-step guide outlined in this article, you can easily initiate a soft reset and restore the functionality of your Uconnect system. Whether you encounter a completely black screen or other display malfunctions, these methods can serve as effective troubleshooting techniques. If you have any questions or comments regarding Uconnect display issues or soft reset procedures, please feel free to leave them in the comment section below. Thank you for reading and happy driving!