Uconnect Not Working in 2016 Jeep Compass: How to Perform a Soft Reset

YouTube video


In this article, we will discuss a simple yet effective solution to resolve the Uconnect system issues in a 2016 Jeep Compass. The Uconnect system is a popular feature in various vehicles, including Jeep, Dodge, Chrysler, and Fiat models. Sometimes, users may experience glitches or malfunctions with this system, causing frustration and inconvenience. Fortunately, there is a simple method called a “soft reset” that can help resolve these issues. In this guide, we will explain two ways to perform a soft reset and provide step-by-step instructions to ensure a successful reset.

Key Points

  1. Uconnect system issues in a 2016 Jeep Compass can be resolved by performing a soft reset.
  2. Soft reset can fix various glitches and malfunctions in the Uconnect system.
  3. Soft reset can be done in two ways: one for older vehicles and one for newer models.
  4. Soft reset restores the Uconnect system back to its factory settings.
  5. Soft reset is applicable not just to Jeep vehicles, but also to Dodge, Chrysler, and Fiat models with the same Uconnect system.
  6. Soft reset is a quick and simple solution that can be performed by the vehicle owner.

Step-by-Step Instructions for Soft Reset

Follow these step-by-step instructions to perform a soft reset on the Uconnect system in your 2016 Jeep Compass:

Step 1: Enter Accessory Mode

First, make sure your vehicle is in “accessory mode” by turning the ignition key to the “ON” position but without starting the engine.

Step 2: Perform Soft Reset

  1. Position your fingers on the Uconnect system, specifically on the screen.
  2. Press and hold the screen firmly for about five to ten seconds.
  3. The screen will go blank, indicating that the soft reset has started.
  4. After a few seconds, the screen will come back on, and the system will recycle.
  5. The soft reset is now complete, and the Uconnect system should be functioning properly.

Alternative Soft Reset Method for Newer Vehicles

For newer vehicles, including those from 2016 to the current 2021 models, follow these additional steps to perform a soft reset:

  1. Make sure the vehicle is in “run mode” by turning the ignition key to the “ON” position.
  2. Locate the top area of the Uconnect system, which may vary depending on the vehicle model.
  3. Press and hold the top area for approximately 15 seconds.
  4. The system will go through a soft reset, resetting some of the settings back to factory defaults.
  5. After the reset process is complete, the Uconnect system should be back to normal.

Important Notes

  1. The soft reset method described in this article is specifically for Uconnect systems in Jeep Compass vehicles from 2016 onwards. It may not work on older models or vehicles from other brands.
  2. If you own a Dodge, Chrysler, or Fiat vehicle with the same Uconnect system, you can also perform a soft reset using the above instructions.


The Uconnect system is a useful feature in modern vehicles, but it can occasionally experience glitches or malfunctions. By following the simple steps outlined in this article, you can perform a soft reset on your 2016 Jeep Compass to resolve these issues. The soft reset process is straightforward and can be completed by the vehicle owner without the need for professional assistance. Remember, if you encounter any difficulties during the reset process or if the problems persist, it is recommended to consult a certified technician for further assistance. Enjoy a seamless Uconnect experience in your Jeep Compass once again!